Sewer And Drain Cleaning: Strategies Of Unclogging The Sewer Line

Sewer And Drain Cleaning: Strategies Of Unclogging The Sewer Line

Are you struggling with clogged drains? There are plenty of ways of unclogging them. You can do it on your own or hire a clogged drain opening professional to help you out. If planning on doing it on your own, here are some of the strategies you can use:

Using a plunger

This is probably the most efficient way as almost every homeowner has a plunger. It’s also easy to use the unit. You should start by filling the sink with a few inches of water. You should then put the plunger in the sink, roll the head of the plunger so that it fills with water. To have an easy time getting rid of the clog, ensure that you have a good seal around the drain. Once the unit is in place, work the handle vigorously up and down until you remove the clog.

Natural cleaners

Natural cleaners are a healthy way of getting rid of minor clogs. All you need to do is use baking soda and vinegar. You should start by ensuring that the sink is dry and pour at least 1 cup of baking soda down it. Follow this by 2 cups of boiling water. The mixture will start foaming which will get rid of the minor clog. The amount of vinegar and baking soda you use is important; therefore, ensure that you use the right amount. If you aren’t sure of the right amount to use, ask a professional to guide you.

Cleaning the P-trap

This is a highly effective way of unclogging the drain pipes, but many people ignore it. The p-trap is located beneath the sink, and by simply cleaning it you might get rid of the annoying clog. You should start by removing any standing water you might be having in your sink. You should then place a bucket beneath the trap then using a pair of slip-joint pliers, remove the slip nuts and remove the p-trap. If the trap is dirty, clean it by removing any debris, it might be having.

Snaking

Sewer and drain cleaning professionals recommend that you use the snake if the plunger fails to work. The drain snake is simply a long wire that you feed through the drain to dislodge a clog. All you need to do is feed the snake through the drain until you break the clog. If you can’t dislodge the clog using this method, you may have to hire a drain contractor to help you out.

Read More

Sewer And Drain Cleaning: Everything You Need To Know About Sewer Clogs

Sewer And Drain Cleaning: Everything You Need To Know About Sewer Clogs

As a homeowner, you will come across sewer clogs. When they happen, you should hire a sewer and drain cleaning professional to help you in getting rid of them or do it on your own.

Leading causes of the clogs

The clogs come about due to many reasons. The most common being:

Tree roots: While it’s rare for the trees in your home to cause a blockage, when the blockage comes about it’s usually the most expensive to fix. This is because, in addition to the trees causing a clog, they also cause the bending and even the breaking of the sewer pipe. In most cases, the clogs come about when trees are growing too close to the sewer pipes.

To avoid this problem, get rid of any trees that might be growing near your sewer lines. You also should consider protecting the sewer lines from the damage of the trees. You can dig a trench besides the sewer lines among many other things.

Foreign objects: These are probably the most common causes of sewer clogs. Some of the most common foreign objects that cause a clog include: plastic bags, stones, and other things that shouldn’t go down the sewer lines.

A telltale sign that a foreign object is causing a clog is an abrupt failure of the system. To prevent clogs created by foreign objects from coming about you should avoid any products that aren’t supposed to be in the sewer lines from getting there. You also should train the people that you are living with on how to handle the sewer lines.

Grease: Clogs caused by oil are common in restaurants, but it’s not rare to find them in homes. In most cases, you will have grease-caused clogs when you pour the used grease directly in your drains. While the grease might seem liquid at the start, it often solidifies when it gets into contact with the cold pipes.

To avoid the clogs brought about by grease you need to have a separate basket to put the oil once you are done with the cooking. As rule of thumb, you should never put oil directly in the sewer drains.

Conclusion

These are some of the primary causes of sewer clogs. The key to avoiding the clogs is being cautious of how you handle them. If you have tried everything and the clogs have come about, you should attempt getting rid of them using an auger or any other device. If they still fail, contact a drain contractor to help you get rid of them.

Read More

About Grease Trap And Restaurant Grease Trap Cleaning

About Grease Trap And Restaurant Grease Trap Cleaning

If you just opened a new restaurant or planning of installing a grease trap in your home for the first time, there are some things you should know about it. Some of these things include:

The unit collects grease and oils

The main reason you are supposed to have a grease trap in your restaurant is to protect your sewer lines. The grease trap functions as a filter, and it filters the waste water coming from the kitchen. According to restaurant grease trap cleaning professionals, the waste water coming from these areas is filled with grease and oils.

If you allow the water to get into the sewer lines without getting filtered, the oils will solidify in the lines causing a clog. As you might have guessed, this would result in sewer line failure, and you have to hire an expensive sewer line repair professional to help you fix it.

Collected grease solidifies in the grease trap

When the oil gets in the grease trap, it cools and solidifies. The level of the oil increases as it continues to accumulate. If you have a large trap, the grease can accumulate for long periods, and this forms a brown grease. This type of grease is made up of grease combined with food particles.

Regardless of the size of the grease trap and frequency of use, you have to clean the grease trap.  Due to the content in the grease, drain contractors advise against reusing it. The best way of going about it is dumping it in the landfills.

You have to clean the grease trap regularly

As mentioned above, regardless of the size of your trap, you have to clean it regularly. This is to maintain the unit in perfect working condition. If the trap is small, you can clean it on your own but if big, hire a grease trap cleaning professional to help you out. You should note that you should manually clean the grease trap. Some people make the mistake of pouring hot liquids down the trap thinking that they are cleaning it.

You shouldn’t do this as it melts the solidified fats and they run into the sewer system. This causes the system to clog, and you have to hire a clogged drain cleaning professional to unclog it for you.

Conclusion

These are some of the things you should know about the grease trap. To have an easy time keeping your unit in top shape, work with a reputable drain contractor.

Read More

Septic Cleaning: Things You Should Know About Your Septic System

Septic Cleaning: Things You Should Know About Your Septic System

If you live out of the municipal sewer lines or in the rural areas, you have a septic tank. If this is the first time you are using the unit there are a number of things you should know:

The tank needs cleaning

To keep the tank in top shape, you need to undertake regular cleaning. Here you need to hire a septic cleaning professional to do it. In addition to cleaning, the professional also inspects the unit for any problems it might be having. While you need to clean the unit, you need to be cautious of how you do it.

One of the mistakes you should avoid making is cleaning the unit more frequently than necessary. In addition to wasting a lot of money cleaning the unit, you also tend to reduce the anaerobic bacteria in the tank which results to slow degradation of the waste products.

You also should avoid cleaning the unit when it’s too late. Late sewer cleaning comes about when you ignore cleaning the unit when you are supposed to. Late sewer cleaning often results in expensive cleaning costs from the sewer and drain cleaning companies. It’s also common for the septic system to develop problems when you stay for a long time without cleaning it.

To tell the right time to clean the unit you should hire a drain contractor to inspect the gray water to solid ratio in the tank. If the ratio is 25% or more, you should pump out the tank.

How you use the tank has a significant impact on its integrity

How you use the septic tank has a significant impact on how efficiently it runs. As rule of thumb, you should be cautious of the materials, you allow into the tank. To be on the safe side, avoid flushing down any non-bio degradable materials such as plastics, sanitary towels, and many others as they will clog the system.

You should also be cautious of the amount of water you allow into the tank as it determines how fast you have to pump the tank. To be safe, aim at reducing the amount of water you allow into the tank.

Conclusion

These are some of the things you should know about your septic system. In addition to the above tips, also regularly hire a sewer line repair professional to fix any issues that might come about.

Read More

Clogged Drain Opening: How To Get Rid Of The Various Types Of Clogs

Clogged Drain Opening: How To Get Rid Of The Various Types Of Clogs

As a homeowner, one of the things you can’t get away from is drain clogs. You can get rid of some of the clogs on your own while others will require the expertise of a clogged drain cleaning professional. To help you out, here are some of the popular clogs you will have to deal with and how to get rid of them:

Sink clogs

You have sinks in almost every area of your house. Some of the things that tend to clog the sinks are soap, hair, toothpaste, and any other products that the sink can’t take. To unclog a sink, you should need to determine the extent of the damage. Is the clog localized in one sink or it’s affecting all the sinks? A problem facing only one sink is basic as you can easily get rid of it using a zip-it tool, auger, or homemade cleaning materials such as vinegar and baking soda.

If the problem is affecting all the sinks, it’s large and you might not be able to get rid of it on your own. In such a scenario you have to hire a sewer line repair professional to help you out. This is because such a problem might be due to the failure of the sewer line.

Toilet clogs

Toilet clogs come about when you flush down non-biodegradable products. These include sanitary towels, paper towels, plastic bags, and chemicals. There are many ways of getting rid of toilet clogs. If the clog is minor, a plunger is enough to get rid of the clog, but the clog is large, you should try using the drain snake. Power drain snakes are the best as they work fast, but you should be cautious when using them as you can easily damage the drain pipe.

If you have tried the above two methods without success, you should contact a toilet drain cleaning professional to help you out.

Shower Clog

A shower clog is brought about by two primary things: hair and soap. To get rid of it, you should find out whether the clog is on the surface or underneath. If it’s close to the surface, simply reach in and pull it out but if its deeper in the drain, visit your nearest store and rent a drain snake. As mentioned, be cautious when suing the snake as you can easily damage your pipes. If you have tried everything without success, contact a sewer and drain cleaning ny professional to help you fix it.

Read More

Clogged Drain Opening: Understanding The Sewer Snake

Clogged Drain Opening: Understanding The Sewer Snake

As a homeowner, you must have a drain snake to unclog your toilets when they block. While this is the case, you shouldn’t use it all the time. To help you out here are tips recommended by clogged drain cleaning bronx professionals to help you decide whether you need to use the unit or not.

Tips to determine whether you should use the sewer snake

The extent of the problem: How big is the drain problem? Before you begin unclogging the sewer system always first undertake an inspection so that you can understand the best tools to use in your work and the unclogging approach you should use. If after inspection you realize that the clog is near the opening of the drain, you should go ahead and use the drain snake but if it’s further down the opening, get the input of a professional sewer contractor on how to get rid of it.

The material of the drain pipes: Drain pipes are made from different materials. There are some that are made from plastic, others from clay, and others from metal. As you know, the drain snake is made from metal. This means that it can easily damage a plastic drain pipe or an old pipe. Your decision to use the drain snake should be informed by the type of sewer pipe you have. If it’s fragile, avoid using the sewer snake as it will be destroyed.

Tips to consider when using the drain snake

If you have come to a conclusion that you need to use the drain snake, you should properly use it to achieve ideal results.

Use the right snake: The first thing you should do is to ensure that you use the right unit. If you have used sewer snakes before you know that they come in different shapes, sizes, and are ideal for various applications. To get the most from the unit, do your research beforehand and ensure that you use the right one.

Use the sewer snake properly: You can have the right snake, but according to sewer and drain cleaning professionals you can fail to achieve perfect results if you don’t use it properly. When working, place the snake as close as possible to the cleanout.

Conclusion

This is what you need to know about the sewer snake. If you have tried unclogging the drains using it without success, you should get the help of a professional drain contractor NY. For peace of mind, ensure that the contractor is certified and experienced enough.

Read More

Clogged Drain Opening: All About The Sewer Snake

Clogged Drain Opening: All About The Sewer Snake

When you have a sewer clog, you have two options. You can hire a drain cleaning bronx professional or do it by yourself. If you have tried using a plunger without success, you should consider using a sewer snake.

Renting a sewer snake

Most homeowners don’t have motorized drain snakes. If you are one of the homeowners, you don’t have to worry as you can always rent it from your local store. When renting, go for a high-quality machine that will work efficiently without any problems.

Choose a machine with a minimum cable diameter of 5/8” to 7/8”. Avoid a cable smaller than this as it won’t be robust enough to cut through the material causing the blockage. Also, avoid a machine that is too small as its most likely able to only clear branch drains inside the house.

When it comes to cable length, go for a machine with at least 75-100 feet of cable. Avoid shorter cables as they won’t reach the clog. The machines are heavy; therefore, go for those with wheels as they will make your work easy.

How to use the sewer snake

To get value for the money you spend hiring the machine, properly use it. Position the machine as close as possible to the cleanout then put the head of the cable into the cleanout. Turn the machine on and slowly feed the cable into the drain while holding it steady.  When you encounter resistance, don’t force the cable to cut through as you can cause the cable to tangle up.

The best way of going about it is moving the cable back and forth until you get rid of the clog. Even after the clog has cleared, feed 10-15” more of the cable to ensure that you completely unclog the drains.

Since the machine is motorized, you should be cautious when working as it can easily injure you or even damage your drain pipes. To avoid injury and damage, hold the machine tightly when working. Also, ensure that there are no distractions that take your attention away from work at hand.

Conclusion

You can unclog your drains on your own using a sewer snake, but you need to be cautious that you don’t damage your pipes or injure yourself. Also, use a machine that is big enough for the work you are doing. If you aren’t confident in your skills, hire a drain cleaning NY professional to help you out.

Read More

Clogged Drain Opening: Expert Tips On How To Handle A Blocked Sink

Clogged Drain Opening: Expert Tips On How To Handle A Blocked Sink

While many homeowners know that they have to face a clogged sink, many of them, especially the new ones, don’t know how to deal with the situation when it comes around. To help you out, here are tips given by drain contractor bronx professionals on how to go about it:

Use a plunger

You should have the plunger in your house, and it should be the first thing you try to use to get rid of a clog. If you are working in the bathroom sink, place a wet rag in the overflow drain. This is to avoid suction. You should do the same when you are working on the kitchen sink with two separate drains. To get rid of the clog, place the plunger over the drain and using an upwards motion, try to remove the blocking material. If the clog isn’t big and you are using the plunger the right way, you will unblock the sink.

Use home-made cleaners

If you don’t have a plunger or you have used it without success, you should use homemade cleaners to try and get rid of the blocking material. Mix hot water with vinegar and pour it down the sink. If the clog is due to grease, the hot water will melt it thus clearing the way. If you don’t want the trouble of making your cleaner, there are some eco-friendly cleaners sold in green stores. Visit your local stores and see if you can find some.

Some people advice that you use chemicals to get rid of the clog but you shouldn’t. While the chemicals are highly effective and get rid of the almost instantly, drain contractors observe that they damage the drain pipes.

Use a snake

No, I’m not talking about the poisonous snake—I’m talking about the plumber’s snake. You should remove the cleanout plug or trap and insert the plumber’s snake into the drain pipes and use it to break up any material that might be stuck in the sink.

Conclusion

It’s rare that these techniques won’t work if you are using them correctly. If the clog still doesn’t go away, it might be because your drain pipes have issues. You should contact your local drain contractor ny professional and ask him to inspect the sink pipes. If they are cracked, the professional might repair them, but if the damage is extensive, there is no way out other than to replace them.

Read More

Facts About Grease Traps And Restaurant Grease Trap Cleaning

Facts About Grease Traps And Restaurant Grease Trap Cleaning

A restaurant grease trap is a unit that you install in your restaurant to trap fats, oils, and grease preventing them from getting into your sewer lines where they would cause a blockage. If you are just getting started with these units there are some things you should know:

You have many options of grease traps

Just like any other units, you have many options to go with when it comes to grease traps. Some of the units are made from steel and others from plastic. It’s up to you to choose the ones that you like. When making your choice, go with those that will last for a long time and are of the right size for your restaurant. For a great experience, ensure that your grease trap is installed by a certified and experienced drain contractor.

Grease traps develop problems

As long as your grease trap is working, it will develop problems that you should have addressed as soon as possible to prevent your restaurant from grinding to a halt. One of the most common problems that you will come across is the filling up of the trap. This will happen when you stay for a long time without cleaning the traps. Due to the filling up, the oils, fats, and grease move to the sewer system where they might cause a blockage that would require you to hire a clogged drain opening professional to restore the proper working of your system.

Another problem you will encounter is a clog in the crossover line. When debris accumulates in the crossover line of your system, it makes the liquid levels in both compartments uneven. As a consequence, there is an overflow of water from one compartment to another.

You have to undertake restaurant grease trap cleaning

To keep your grease trap in a top working condition, you have to clean it regularly. The frequency at which you should do it depends on the size of your restaurant. If the business is large and busy, you should clean the grease trap at least once a month but if it isn’t too busy, clean it once every three or more months. You can undertake the cleaning by yourself if you have the skills but if you haven’t done it before, hire a grease trap cleaning ny professional to help you out.  For ideal results, ensure that the professional you hire is certified and experienced to do the work.

Read More

Septic Cleaning Tips You Should Always Remember

Septic Cleaning Tips You Should Always Remember

To keep your septic in top shape, you have to undertake septic cleaning. To have an easy time with the cleaning and also achieve ideal results you need to consider a number of tips:

Don’t clean your tank too regularly

To avoid clogging and keep their systems running efficiently, many homeowners know that they need to clean their tanks regularly. Septic system experts recommend that you clean your tank at least once every 3-5 years depending on the size of the tank and the number of people living in the house. While some of the homeowners can accurately tell the best time to clean the tanks, others go overboard and clean the systems more regularly than its necessary.

While doing this will keep your system clog free, it will result in you spending a lot of money than you should. You also tend to reduce the concentration of anaerobic bacteria in the tank thus your system doesn’t work as efficiently as it should. If you aren’t sure of the frequency at which you should clean your tank, you should get the input of a sewer and drain cleaning professional.

Don’t pump the tank to “fix” it

If you have been having your tank for a long time, you must have come across a contractor who told you that you need to pump out the tank to fix a clogged drain. Most of the contractors will advise you to do this when they want to make more money or are lazy to identify the exact pipe that is having problems.

While this will fix the problem, it will result in you spending money that you shouldn’t have. If you come across a professional advising you to completely pump out the tank to fix a broken drain, you should avoid working with him/her and find another.

Pump out the tank at the right time

While some people pump out their tanks more often than they should, others don’t clean the tanks at the right time. This translates to regular clogs that are expensive to get rid of. As mentioned above, you should pump out your tank every 3-5 years. If your tank is small or there are many people in your house, you should consider pumping it more regularly. Signs that it’s time to clean the tank include: frequent clogs, odors, and noises. When you notice any of these signs, you should contact a drain cleaning ny professional or any other expert to address the issue.

Read More